Nationally Recognised Test & Tag Training Course
Online Module: 2-3hrs in participants own time. | Face To Face Module: 1 Day Course or Online/Virtual
Our nationally recognised Test & Tag course gives you the practical skills and a Statement of Attainment required to meet Australian standards without overcomplicating the process.
Available in Sydney, Brisbane, Canberra, Melbourne, Adelaide, Newcastle, Wollongong, as well as online and virtual delivery options.
Train with Confidence. Gain Your Statement of Attainment.
Our Test & Tag course is built around real-world application, combining flexible learning with hands-on training to ensure you’re job-ready from day one.
By completing this course you will receive the certificate of attainment for UEESS00174 Electrical Safety Testing of Electrical Cord Connected Equipment and Cord Assemblies Skill Set , comprising of UEERL0003 and UEECD0007.
This course is delivered in two parts:
Online Module (2–3 hours)
Complete in your own time before attending your practical training.
- Unit: UEECD0007 – Apply Occupational Health and Safety Regulations, codes and practices in the workplace
Face-to-Face or Virtual Module (1 Day)
Hands-on training with real equipment and guided instruction.
Unit: UEERL0003 – Conduct in-service safety testing of electrical cord assemblies and cord connected equipment
You’ll gain practical skills you can apply immediately in the workplace:
- Inspect and identify faults in electrical equipment
- Perform safe and accurate testing procedures
- Use industry-standard portable appliance testers
- Apply correct tagging and documentation processes
- Understand compliance requirements under AS/NZS standards
We focus on practical, straightforward training that works in real environments.
- Train on leading testers including Metrel MI 3309, Seaward PAC3760 DL, U-Test 376t and Kyoritsu 6205 and Wavecom TnT.
- Bring your own tester for hands-on familiarity
- Small class sizes for better participation
- Our courses meet SafeWork and WorkCover requirements
- Delivered by fully qualified and experienced Trainers & Assessors
We’re committed to delivering training that’s clear, practical, and worth your time.
If you need help during or after your course, our team is here to support you so you’re never left guessing.
Everything you need to complete your training successfully:
- Comprehensive training manual (yours to keep)
- Hands-on access to testing equipment
- Nationally recognised through statement of attainment with units UEERL0003 and UEECD0007
- Statement of Attainment upon successful completion
- Ongoing post-course support
Course Inclusions
All the tools and resources required to ensure your successful completion of the training program, including vital materials and support.
Materials
Receive a comprehensive training manual to support your learning, yours to keep and refer back to on the job.
Training
Hands-on training using real equipment, guided by experienced trainers to ensure you build practical, job-ready skills.
Statement of Attainment
On successful completion, receive a nationally recognised Statement of Attainment valid across Australia.
Our Upcoming Courses
Looking to get qualified soon with the nationally recognised Statement of Attainment? Here are our next available sessions.
Whether you prefer in-person training or need a more flexible option, we’ve got courses running regularly to fit your schedule.
Our Locations Across Australia
We deliver Test & Tag training across major cities and regional areas, making it easier to access certification wherever you’re based.
Prefer flexibility? We also offer virtual classes and self-paced online training ideal for regional customers and busy schedules.
Course Requirements
Before starting your training, here’s what you need to know to get the most out of the course.
No Prior Experience Needed
You don’t need any electrical background to enrol. This course is designed for beginners as well as those looking to formalise their skills.
Complete the Online Module
Participants are required to complete the online learning module (approx. 2–3 hours) before attending the practical training session.
Attend the Practical Training
You’ll need to attend the face-to-face or virtual training session, where hands-on learning and assessment take place.
Basic Language & Understanding
A basic level of English and understanding is required to follow instructions, complete assessments, and safely carry out testing procedures.
Course Recognition
Upon successful completion of the course, you will receive a Statement of Attainment for the following nationally recognised units:
- UEECD0007 – Apply Occupational Health and Safety Regulations, codes and practices in the workplace
- UEERL0003 – Conduct in-service safety testing of electrical cord assemblies and cord connected equipment
This recognition is recognised across Australia and confirms your competency to carry out Test & Tag procedures in line with current standards.
We Make It Easy For Our Customers
Everything you need for Test & Tag-training, equipment, accessories, and support—all in one place. No jumping between suppliers. No guesswork. Just reliable tools and training that work together.
PAC3760 DL
Delta Zebra Pro Print Kit (Delta aPAT Pro)
Everything You Need to Know Before You Get Started
Thinking about enrolling? Here are some of the most common questions we get about our Test & Tag course so you know exactly what to expect.
If you’re still unsure, our team is always here to help.
No. This course is suitable for beginners and those with no electrical background. We’ll guide you through everything step by step.
The course includes a 2–3 hour online module (completed in your own time) and a 1-day practical training session (face-to-face or virtual).
Yes. Upon successful completion, you will receive a Statement of Attainment that is recognised across Australia.
You’ll learn how to inspect, test, and tag electrical equipment safely, use testing tools correctly, and understand compliance requirements under AS/NZS standards.
Yes. The theory component is completed online, and you can choose between face-to-face or virtual training for the practical component depending on what suits your schedule.
Yes. All tools, testing equipment, and an instruction manual are supplied for use during the course.
Everything You Need, All in One Place
Get trained, get equipped, and get started-all in one place. We keep things simple with practical courses, reliable tools, and ongoing support you can count on.
Get In Contact With Us
Have a question or need assistance? Contact us below.
We’re With You Beyond the Course
Lifetime Technical Support Included
You’re not on your own once the course is done. From technical questions to choosing the right equipment, we’re here to help whenever you need it.
